Axolotl Regeneration- Final Project

Galleries:
- Skelly22's Private Gallery
- Skelly22's Public Gallery
Tags:

Axolotl Regeneration- Final Project

To start the simulation, press setup then toggle the forever button and allow the pink stamp to lay down a layer of pink. Lastly press cut and observe!

Note: the simulation does not work every time so you may need to press setup again! Also you may want to speed up the simulation with the slider on the right.

Owner: Skelly22
Collaborators:
Created: April 21, 2021, 1:27 p.m.
Version: 0 (Current Version) View Project History
Remixed from:Axolotl Regeneration 1.1 REMIX WOUND EPITHELIUM WORKING
Privacy: Public - any user can view this project

Engine speed5

Loading...

Search for Shapes

No assets available.

Shapes in this Project

No assets in this project.

Upload a Shape

Search for Sounds

No assets available.

Sounds in this Project

No assets in this project.

Save Sound

x Help

1. Use the left, right, up, and down arrow keys on the left to orient your model so that it is right-side-up and facing to the right.

2. Use the + and - keys to resize your model to what you want it to be at size one. The lattice cube of size 1 is there for reference. Note: Any part of your model sticking out of the cube will not be detected in collisions.

3. Use the up and down arrow keys on the right to adjust the position of your model at ground level, with the bottom of the lattice cube being the ground.

4. Use the "Flip Lighting" button to make sure that your model appears lit up before submitting.